14 Creative Ways To Spend Left-Over Ghost 2 Immobiliser Budget

Protect Your Car From Key Long and Relay Theft With a Ghost 2 Immobiliser

The innovative Ghost immobiliser protects your pride and joy against key-long theft and relay theft. With a personal PIN sequence, unless you know the code, your vehicle won't start!

It also comes with Transport Mode that allows you to temporarily disable the device which is ideal for transport and servicing. It is then activated by entering a PIN code again.

No Key Fobs or Led Indications

The Ghost 2 immobiliser is a innovation in automotive security technology that provides a strong defense against modern car theft techniques. Its unrecognizable installation and engine start blocking can reduce the chance of your vehicle being stolen, which could offer peace of mind and potentially even save you money on insurance premiums.

It isn't detectable by scanners, and it cannot be hacked with common methods such as key cloning or signal jamming. The device uses existing buttons in your vehicle, such as those on the steering wheel, door panels and the centre console to generate an unique, customizable PIN code sequence that is as long as 20 presses. Only the owner of the vehicle is able to start the engine when the right sequence or a beacon or mobile application is employed. This adds an additional layer of protection against thieves.

You can also enable the service mode to help in situations like valet parking or maintenance that require you to temporarily disable the system. This can be accomplished quickly and easily via an app for mobile devices, which means your vehicle is secure while being repaired. When the work is done it is simple to switch back to secure mode. This ensures that your car is secure at all time.

Unlike other immobilisers from the aftermarket that operate with fobs, the Ghost 2 can be operated directly through the vehicles existing buttons, making it easier to use than conventional systems. The app also functions as a spare key for emergency situations, allowing you to drive your vehicle with the security turned off without needing to enter your PIN code.

No Radio Frequency Signals

Unlike traditional security systems that have their own dedicated remote and remote, the Ghost 2 immobiliser doesn't require any additional key fobs and can be used with existing buttons on the steering wheel or the centre console. It is indetectable by thieves using RF scanning technology or code grabbing, meaning your car won't even start should they get your key.

The device employs an exclusive 'password' sequence of buttons that locks the engine. This personalised PIN code can be entered on the app or using the vehicle's existing buttons on the steering wheel and centre console. You can also lock the gearbox so that your vehicle cannot be driven unless you've got your key or enter your pin code. The device can also be set to Transport mode, allowing you to drive your car without entering the pin code. This provides your vehicle with extra protection when it's being used for service or valet parking.

The Ghost 2 immobiliser is designed to act as a deterrent to theft that is as discrete as it can be, making it an attractive choice for those who've spent a lot of money on customising their vehicles or own rare or expensive cars. Many have reported that this device is a great option to stop their cars from being stolen. Some have even told stories of attempted thefts of cars which were thwarted by the device. The Ghost 2 is also very versatile. Users have reported that it can be used with their regular keys as well as with the emergency button on their car, giving them security when they're not in their car.

No Radio Frequency Scanners

Protect your vehicle from hacking, key cloning and key theft by using a Ghost immobiliser. The system utilises the buttons in your vehicle, such as those on the dashboard and your steering wheel to create a unique and programmable button sequence that only you know. Without this sequence, your car cannot start. The combination of a unique disarm sequence and the absence of radio frequency signals makes the device difficult to penetrate or evade.

In contrast to devices which depend on radio frequency scanning The Ghost CAN Immobiliser is completely silent and doesn't require any external signals to work its magic. It is a more secure alternative and can be insured if it is installed by an approved installer of TASSA (we are one of them!) ).

It is highly recommended that a professional installer install the Ghost immobiliser. This is due to the way it is integrated into the vehicle. This will ensure that it is fully integrated into the vehicle's systems, leading to optimal performance and lower risk of malfunction.

Additionally, professional installation often includes warranties and support that further increase the value of your investment. This is a major deterrent to potential thieves, who are less likely than before to try and bypass the device due to its extensive security features.

In addition to being an effective deterrent for thieves, in addition to being a great deterrent for thieves, Ghost is designed to be user-friendly too. It can be configured to automatically re-arm itself after a specific amount of time, so you don't have to remember your PIN code each time you park your vehicle. It also has a Service/Valet mode if you want to leave your car for valet parking or to service. It can be activated and turned off using an easy indicator sequence.

No Wire Cutting

The Ghost 2 does not require cutting any wires from your car during installation, ensuring the non-invasive integration of your vehicle's original systems. It connects to the vehicle's CAN data network and is programmed with a unique PIN which prevents other people from starting your engine if they don't have a unique PIN sequence or app authorisation.

The device is also undetectable by the sophisticated scanning tools which some thieves use and is silent as it doesn't emit radio signals like other immobilisers.  ghost immobiliser and tracker , sealed, and tiny enough to be concealed anywhere inside the vehicle making it near impossible to spot.

Another benefit of the Ghost II is that it can be put into "transport mode" for brief periods without the need for an individual PIN sequence. This is ideal for situations like lending the vehicle to someone in the family or a friend or in emergencies which allows you to get your car started and leave quickly and safely.

It's important that you work in a well-lit area when installing the Ghost II. You should wear safety gear when working with electrical components and tools. A basic set of hand tools can enable you to make precise connections and a multimeter can be used to check electrical values and make sure your wiring is secure. Cable tie and insulation tape can be used to protect any wires that have been cut or exposed or to join them during the installation.

It's also vital to disconnect the battery prior to trying any wiring work on your vehicle. This will prevent any airbag deployments by accident or electrical shocks from occurring in the event that the battery is accidentally disconnected when the Ghost II is still connected to the vehicle's system.

Easy to Install

The Ghost immobiliser is a unique next-generation device that operates by connecting directly to your vehicle's CAN Data Network and using a unique PIN Code to stop your car from beginning. This makes it more difficult to hack than conventional key fobs and alarm systems and offers greater protection against key cloning hacking, and relay attacks.

The device can be hidden in your vehicle, and it uses the buttons on your steering wheel and dashboard to create a unique sequence you only know. This stops thieves from being able make use of a key that is cloned to start the vehicle and additionally, it prevents them from using an instrument for diagnosing that thrives on hacking into the OBD.

Installation is simple and does not require cutting wires. The unit is connected to the vehicle's CAN bus via an unchanging 12V supply and a grounding connector. Basic hand tools are sufficient for installation, and a multimeter will assist in locating the right wires. To safeguard the connections from damage insulation tape or heat shrink tubes are suggested. Cable ties can be used to keep the wiring neat.

After installation, the device is in a learning mode, and records your unique sequences and buttons to create your unique pin code. The information is saved in the CAN network which makes it nearly impossible for anyone to duplicate your sequence and then start your vehicle.

If you forget your PIN Code or sell your car, or the button becomes inoperative, there is an emergency override function known as Transport Mode. This will shut down the Ghost System completely, however it will reactivate itself automatically when you go over 31mph for longer than 15 minutes or enter your PIN Code. This is ideal for those who rent their vehicles regularly through services such as Turo or ZipCar.